Policies, Plans, Procedures

Space Heater Usage Policy

Space heaters should be limited to use in temporary conditions and with the restrictions for use as required by the local Fire Department.   EH&S and Physical Plant reserve the right to inspect and remove from service any space heater that does not meet the listed requirements or creates a hazard.

The space heater must:

• Be inspected / approved by Physical Plant or Environmental Health & Safety

  prior to use, and be re-inspected annually; (Inspection stickers must be placed on the space heater); Call x4444 to request inspection.

• Be UL or FM approved;

• Be electric - units that require no more than 120 volts are permitted;

• Be in sound condition and working order. Units that have been modified or have

  frayed cords are forbidden. Units that malfunction must be removed;
  

• Have a functioning "tip-over" shut off switch;

• Have a thermostat to regulate the heat output;

• Not be used at settings that use more than 1000 watts;

• Must contain ceramic heating elements;

• Be clearly visible;

• Be placed only on a flat and level surface;

• Be kept at least three (3) feet away from combustible and flammable materials,                            

  on all sides of the unit;

• Be plugged directly into a wall outlet (NO EXTENSION CORDS PERMITTED);

• Be turned off and unplugged at the end of the work day or when left unattended;

• Not be used to heat an area that is not designed to be heated.